- Delivery & Returns
- Size Chart
Set of heavy shrouds for Solo (3mm T terminal to swaged eye using 1x19). Suitable for the Selden & Super Spars range of Solo masts.
NOTE : The Solo shrouds and forestays supplied by Rooster are designed to fit the current range of FRP hulls built by Rooster/Ginger, Winder, Ovington/Boom, Speed, JP, Rooster and the Boatyard at Beer Solo hulls. The first Winder FRP was built approx. Feb 2000 sail number 4278. If you have a Solo built by another builder, such as a Miles, Thresher, Gosling Dinghy craft, Holt Allen, Seven Sailboats, Crawshaw, JJ Boats, Lock, Ledger, Tim Harper etc, there can be differences in the mast step height and hence the current production Solo shrouds and forestays may be too long/short.
Also, if you have a non Selden/Super Spars mast such as a Wavelength/Needlespar mast, please contact us with your shroud length as this will be different from the current Selden/Super Spars mast range.
Send an email to Rooster Sales
Please contact Rooster Sailing if your Solo is not a current design FRP hull and would like mast rigging for your Solo.
Measurement of Shrouds
Rooster use a Bearing Surface (BS) to Bearing Surface (BS) length measurement. On the Solo shroud this is from the lower swaged eye to the T terminal and is a length of 3840mm (see diagram). This gives a mid-position on the shroud chain plate adjuster.
Please input your Bearing surface to Bearing surface length measurement or 3840mm
Please note this item is classified as a CUSTOM PRODUCT and hence customers should be aware of the returns policy as found in the current Rooster Terms and Conditions.