Your Basket

Your your basket is currently empty

Shipping calculated at checkout Checkout

Kit Guide

Blog articles on recommendations and suggestions on purchasing and using the Rooster water sports kit.

Topper Mast Cup Assembly

By Dave Cockerill 22nd February 2022

To remove an old cup: Remove the mast gate for easier access. Remove the nut and washer from the top of the cup. Remove the cup. Few come off easily. The last one I did came off easily after I power washed around it. I imagined I'd broken any suction and cleared any build up of grit. In the past we have gripped the lip with a pair of long nose pliers and ‘unscrewed’ them. The easiest way is to drill out the ‘core’ of the cup with a 22mm hole saw. This will expose the second nut below the...

Your New Rooster Trailer - Loading tips, User Guide & Care.

Once you have taken delivery of your new Rooster road trailer, below you will find some useful information about setting up...

By Mark Harper 22nd February 2022

Guest Blog: Bimbling the RS100, by Clive Eplett

About the time the RS100 was announced, I was chatting to supercrew and ex-colleague Roz McGrane. “I quite fancy one...

By Rooster Sailing 22nd February 2022

What is a Rigging Coat?

About 3 years ago I thought we should try and produce our take on a neoprene rigging coat but use...

By Steve Cockerill 22nd February 2022

Harmonised Rope Colours - Dream or Reality?

Standardisation of rope colours has been a hobby horse of mine for a very long time. I'm pretty sure it...

By Steve Cockerill 22nd February 2022